Browser-side firmware flashing flow for the STM32MX103 course board when it is in
DFU mode.
Best For
Live lessons and demos
Main Hardware
Bluepill, MAX7219, MPU6050, HC-SR04, HC-05
Main Interfaces
Web Serial, Browser Docs, Web DFU
Course Flow
Connect, explore, teach, automate, flash
WebUSB
Checking…
DFU Device
Disconnected
Target Address
0x08001000
Selected Image
None
Flash Setup
No file selected.
Default settings match the course DFU flow used by
dfu-util -a 0 -s 0x08001000:leave.
Firmware SerialDisconnected
ProgressIdle
Percent0%
Flashing Notes
Chrome or Edge on desktop is required. WebUSB is not broadly available
elsewhere. This page is aimed at the course project DFU bootloader and normal application
image layout. If the board does not leave DFU automatically after flashing, unplug and
reconnect it once.
